*** rcFoamFighters FF-35***
Model Name: FF-35
Plan Design By: Paul Petty (Jan. 2011)
Description: An original design Foamboard RC Model Airplane by Paul Petty inspired by the US Air force F-35 joint Strike Fighter. The plane features a flat shaped wing with a 3D Shaped fuselage and angled vertical stabilizers. Also features Delta Mixed Quad Aileron/Elevator control surfaces for “Bank and Hank” flying. 3D shaped cockpit & fuselage for low drag and semi-scale looks. Recommended for hobbyists with Intermediate to Advanced foamboard building skills. With the basic setup the plane is OK for beginner to advanced pilots. The Fast Setup is recommended for pilots with adequate flying skill and not beginners.
PDF Plan Cost:$6.00 |
 |
| Basic Plane Specs | |
| Wingspan: | 24.0 Inches (60.96cm) |
| Length: | 28.83 Inches (73.23cm) |
| All Up Weight (AUW) | 23.0oz. (652gm) |
| Recommended Parts Needed To Finish Build | ||||
| Basic Setup | (55+MPH) | Fast Setup | (70+MPH) | |
| Motor: | 2212 2200KV Brushless Motor | Motor: | Grayson Hobby Super Mega Jet | |
| ESC: | 30A Brushless ESC with BEC | ESC: | 50A Brushless ESC with BEC | |
| Prop: | 6×4 PROP | Prop: | APC 6X5.5 | |
| Battery: | 3S 2200mA 40C or Better | Battery: | 3S 2200mA 40C or Better | |
| Servos: | 2 Mini Metal Gear (9 to 16 gram) | Servos: | 2 Mini Metal Gear (9 to 16 gram) | |
| TX/RX: | 4-Channel with Delta Mixing | TX/RX: | 4-Channel with Delta Mixing | |
Build & Flight Videos: