FF-21 Blackjack - Information and Plans
Picture Sponsor Ad

Link to HobbyKing.com

FF-22 RC Model Designed by: Ken Tanpinco
This RC model is a completely original design by Ken Tanpinco. The original RC model design was made with Dollar Tree Foamboard and covered with sealing/packing tape. Other materials such as Depron and Fan Fold Foam may be used to make this model.
Free Tiled PDF Plan Free Non-Tiled PDF Plan
Link to Tiled PDF Plans Non-Tiled PDF is not Available at this time
All plans are free, but if you would like to directly support and encourage the Model Designer, donations are welcome. That or if you just want to buy the designer a beer, or more like a late night coffee, thats cool too...LOL. Any help to support the rcFoamFighters team and their efforts is greatly appreciated.
  1. Wing Span: 21 Inches (53.34cm)
  2. Length: 25.6 Inches (65.02cm)
  3. AUW: 17 Ounces (482gm) (As Built with FoamBoard, Depron or Fan Fold may result in a lighter model)
  4. Servos: 2 Micro (Metal Gear Recommended)
  5. Motor: Turnigy H2218-2500kv Brushless Outrunner (2212/6 may be used for basic setup)
  6. Speed: 65mph to 90+mph (104.5kph to 144.8kph) depending on motor used
  7. Required Radio: Minimum 4-Channel with Delta mixing (Recomended 6 channel 2.4ghz)
  8. Flight Skill Required: Intermediate to Advanced
  9. Building Skill Required: Intermediate
Parts And Equipment Ideas For This Model Sponsor Ad
Brushless Motors

Link to rcSkyFlyer.com

Park Jet Combo
ParkJet Combo 2212-06 V2 Super-Sonic Brushless Combo
Combo Pack, ESC included!
Link to Motor
TURNIGY H2218-2500
This is the motor Ken used to push the plane to 90+ mph
Super Mega Jet Combo
GraysonHobby Super MegaJet V2 & GH 50A w/BEC ESC
Combo Pack, ESC included!
Brushless ESC's (With BEC)
Link to ESC
Link to ESC
Lipo Batteries

Link to HobbyKing.com

TURNIGY 1800 3S 30c
Link to Battery
Turnigy Nano-Tech 1600ma 4S 25-50C

Hextronik MG Servo

Corona MG Servo
Radios and Tape

Copyright rcFoamFighters.com 2010