FF-35 (Foam Fighter 35) - Information and Plans
Picture Sponsor Ad

Link to HobbyKing.com

FF-35 RC Model Designed by: Paul Petty
This RC model is loosely based on the F-35 Joint Strike Fighter Fighter used by the USAF. The original RC model design was made with Readiboard brand Foamboard and covered with colored sealing/packing tape. Other materials such as Depron and Fan Fold Foam may be used to make this model, but may require carbon spars.
Tiled and Non-Tiled PDF Plan
Link to PDF Plans
All funds raised by the sale of this plan and others on this site will help support rcFoamFighters many projects and endeavors. We truely appreciate all your support!
  1. Wing Span: 24 Inches (60.96cm)
  2. Length: 28.83 Inches (73.23cm)
  3. AUW: 23.0 Ounces (652gm) (As Built with FoamBoard, Depron or Fan Fold will result in much lighter model)
  4. Servos: 2 Micro (Metal Gear Recommended)
  5. Motor: Turnigy 2836-2350 Motor or Grayson Hobbies Super Mega Jet
  6. Speed: 60mph to 70+mph (96kph to 112kph) depending on motor used
  7. Required Radio: Minimum 4-Channel with Delta mixing (Recomended 2.4ghz)
  8. Flight Skill Required: Intermediate to Advanced
  9. Building Skill Required: Intermediate
Parts And Equipment Ideas For This Model Sponsor Ad
Brushless Motors

Link to rcSkyFlyer.com

Super Mega Jet Combo
GraysonHobby Super MegaJet V2 & GH 50A w/BEC ESC
Combo Pack, ESC included!
Link to Motor
TURNIGY 2836-2350
Note, Motor shaft must be reversed to use this motor.
NOTE!!!! The shaft must be modified on the Turnigy 2836-2350 motor before it can be used!!!! You must switch the side the Prop attaches to by pressing the shaft forward.
See Video of Shaft Mod
Brushless ESC's (With BEC)
Link to ESC
Link to ESC
Lipo Batteries

Link to HobbyKing.com

Link to Battery
TURNIGY 2200 3S 30c
Grayson Hobbys 3S 2200ma 30-40C Lipo
GraysonPower 2200ExtremeHV 11.1V 30C / 40C Lithium Battery Pack

Hextronik MG Servo

Corona MG Servo
Radios and Tape

Copyright rcFoamFighters.com 2010