FF-SuperNova - Information and Plans
Picture Sponsor Ad
FF-Supernova

Link to HobbyKing.com

FF-SuperNova RC Model Designed by: Paul Petty
This RC model is an original model designed and developed by Paul to be a fast and agile speed plane. This is one of the best flying rcFoamFighters planes to date. The original RC model design was made with 30mm and 15mm 1.9 EPP Foam and covered with fiberglass weave & colored sealing/packing tape. Other materials such as Blue Core Foam may be used to make this model, but will not be "Bulletproof". FFFTW!!!
Free Tiled PDF Plan Free Non-Tiled PDF Plan
Link to Tiled PDF Plans Non-Tiled PDF is not Available at this time
All plans are free, but if you would like to directly support and encourage the Model Designer, donations are welcome. Any help to support the rcFoamFighters team and their efforts is greatly appreciated.
BASIC RC MODEL NOTES:
  1. Wing Span: 34 Inches (86.36cm)
  2. Length: 35.7 Inches (90.68cm)
  3. AUW: 48.6 Ounces (1377.81gm) (As Built with 1.9 EPP)
  4. Servos: 2 Metal Gear Recommended)
  5. Motor: Turnigy 3648-1400 Motor)
  6. Speed: 130+mph (144.4kph) with Turnigy 3648-1400
  7. Required Radio: Minimum 4-Channel (Recomended 6 channel 2.4ghz)
  8. Flight Skill Required: Intermediate to Advanced
  9. Building Skill Required: Beginner to Intermediate
Parts And Equipment Ideas For This Model Sponsor Ad
Brushless Motors

Link to rcSkyFlyer.com

Link to Motor
TURNIGY 3648-1400
(WOW 1600 Watts Man!!)
NOTE!!!! The shaft must be modified on the Turnigy 3648-1400 motor before it can be used!!!! You must switch the side the Prop attaches to by pressing the shaft forward.
See Video of Shaft Mod
Brushless ESC's (With BEC)
Link to ESC
TURNIGY 100A K-Force
Lipo Batteries

Link to HobbyKing.com

Link to Battery
Flightmax 2650ma 5S 40C
Servos

Turnigy 555MG Flat Wing Servo with Alum. Control Arms
Radios and Tape

Copyright rcFoamFighters.com 2010