Foam, Glue, Tape And A Little Imagination

*** rcFoamFighters FF-22 ***

Model Name: FF-22

Plan Design By: PaulPetty (Jan. 2009)

Description: Foamboard RC Model Airplane created by Paul Petty. The FF-22 is inspired by the F-22 Raptor of the US Air Force. The plane features a simple flat wing, box fuselage and slanted vertical stabilizers. Also features basic Aileron & Elevator control surfaces for “Bank and Hank” type flying. Recommended all hobbyists with Basic to Advanced foamboard building skills. This is a good plane for first time Foamboard builders and beginner Flyers because of its easy build and rock solid flight characteristics. 



PDF Plan Cost:


Link to Tiled PDF Plans
Basic Plane Specs
Wingspan: 24.0 Inches (60.96cm)
Length: 36.46 Inches (92.60cm)
All Up Weight (AUW) 24.0oz. (580.4gm)


Recommended Parts Needed To Finish Build
Basic Setup (60+MPH) Fast Setup (80+MPH)
Motor: 2212 2200KV Brushless Motor Motor: Grayson Hobby Super Mega Jet
ESC: 30A Brushless ESC with BEC ESC: 50A Brushless ESC with BEC
Prop: 6×4 PROP Prop: APC 6X5.5
Battery: 3S 2200mA 25C or Better Battery: 3S 2200mA 45C or Better
Servos: 3 Mini Metal Gear (9 to 16 gram) Servos: 3 Mini Metal Gear (9 to 16 gram)
TX/RX: 4-Channel or better TX/RX: 4-Channel or better

Original Old Development, Build, & Flight Videos: