Foam, Glue, Tape And A Little Imagination

*** rcFoamFighters FF-BOP (Bird Of Prey) ***

Model Name: FF-BOP

Plan Design By: Paul Petty (Aug. 2011)

Description: Original Foamboard RC Model Airplane with a design inspired by the Boeing Bird of Prey concept stealth jet. The plane features a unique Gull Wing shaped wing and a lifting body type fuselage. Also features Mixed Delta Elevator/Aileron control surfaces for “Bank and Hank” flying. 3D sleek cockpit & fuselage for semi-scale looks. Recommended for hobbyists with Intermediate to Advanced foamboard building skills. This plane is a great Flyer for pilots with intermediate to advanced skills. Note this plane if built should only be hand launched at about half to three quarter throttle. The small size and wing shape can make it apt to having torque roll at launch. Once speed is built up it flies nicely. Because of these flight characteristics it is recommended only for pilots with the adequate skills.

PDF Plan Cost:

$6.00

Basic Plane Specs
Wingspan: 21.64 Inches (54.97cm)
Length: 35.32 Inches (89.71cm)
All Up Weight (AUW) 21.0oz. (595gm)
Recommended Parts Needed To Finish Build
Basic Setup (70+MPH) Fast Setup
Motor: 2212 2200KV Brushless Motor Motor:
ESC: 30A Brushless ESC with BEC ESC:
Prop: 6×4 PROP Prop:
Battery: 3S 2200mA 45C or Better Battery:
Servos: 2 Mini Metal Gear (9 to 16 gram) Servos:
TX/RX: 4-Ch or better w/Delta Mixing TX/RX:

Build & Flight Videos:



Archives