Foam, Glue, Tape And A Little Imagination

*** rcFoamFighters FF-Bullet Plane ***


Model Name: FF-BulletPlane

Plan Design By: Frank Petty (Feb. 2011)

Description: An original design Foamboard RC Model Airplane by Frank Petty. The plane features a Delta shaped wing with a KFm2 Airfoil with fuselage and wing tip vertical stabilizers. Also features basic Delta Mixed Aileron/Elevator control surfaces for “Bank and Hank” flying. Sleek shaped cockpit & fuselage for low drag and high speeds. Recommended for hobbyists with Basic to Advanced foamboard building skills. Because this is a fast flying plane it is recommended for pilots with adequate skill and not beginners.


PDF Plan Cost:


Basic Plane Specs
Wingspan: 24.0 Inches (60.96cm)
Length: 28.69 Inches (72.87cm)
All Up Weight (AUW) 16.0oz. (453.6gm)


Recommended Parts Needed To Finish Build
Basic Setup (80+MPH) Fast Setup (100+MPH)
Motor: 2212 2200KV Brushless Motor Motor: Grayson Hobby Super Mega Jet
ESC: 30A Brushless ESC with BEC ESC: 50A Brushless ESC with BEC
Prop: 6×4 PROP Prop: APC 6X5.5
Battery: 3S 1300mA 40C or Better Battery: 3S 1800mA 40C or Better
Servos: 2 Mini Metal Gear (9 to 16 gram) Servos: 2 Mini Metal Gear (9 to 16 gram)
TX/RX: 4-Channel with Delta Mixing TX/RX: 4-Channel with Delta Mixing

Flight Videos: