Foam, Glue, Tape And A Little Imagination

*** rcFoamFighters FF-NojaJet ***

Model Name: FF-NovaJet

Plan Design By: Paul Petty (Nov. 2008)

Description: Original EPP Foam RC Model Airplane created by Paul Petty. The FF-NovaJet was designed to be a fast and agile Flyer. The plane features a semi-symmetrical airfoil main  wing, blended wing/fuselage and straight vertical stabilizers. Also features Mixed Delta Aileron/Elevator control surfaces for “Bank and Hank” type flying. Recommended all hobbyists with Basic to Advanced foam building skills. This is a good plane for first time EPP Foam builders and Flyers with Intermediate to Advanced Flying Skills. It is a super agile plane and can turn on a dime, but at the same time has rock solid flight characteristics. 

 

 

PDF Plan Cost:

**FREE!!**

Link to Tiled PDF Plans
Basic Plane Specs
Wingspan: 28.0 Inches (71.12cm)
Length: 29.4 Inches (74.68cm)
All Up Weight (AUW) 28.3oz. (880.23gm)

 

Recommended Parts Needed To Finish Build
Basic Setup (75+MPH) Fast Setup (100+MPH)
Motor: 2212 2200KV Brushless Motor Motor: Grayson Hobby Super Mega Jet
ESC: 30A Brushless ESC with BEC ESC: 50A Brushless ESC with BEC
Prop: 6×4 PROP Prop: APC 6X5.5
Battery: 3S 2200mA 25C or Better Battery: 3S 2200mA 45C or Better
Servos: 2 Mini Metal Gear (9 to 16 gram) Servos: 2 Mini Metal Gear (9 to 16 gram)
TX/RX: 4-Ch or better w/Delta Mixing TX/RX: 4-Ch or better w/Delta Mixing

Original Old Flight Videos:


Archives