Foam, Glue, Tape And A Little Imagination

*** rcFoamFighters FF-Predator ***

Model Name: FF-Predator

Plan Design By: Tim McMahan (Dec. 2009)

Description: Foamboard RC Model Airplane by Tim McMahan that was inspired by the US Air Force Predator Drone. The plane features a 60-inch main wing with a KFm2 airfoil and and slanted vertical stabilizers.  Also features all the standard control surfaces, Elevator, Ailerons and Rudder. It has a 3D nose carved from a foam block and a pentagonal shaped fuselage.  Recommended for all hobbyists with Intermediate to Advanced foamboard building skills and Intermediate to Advanced Flying Skills. 

 

PDF Plan Cost:

** FREE **

Basic Plane Specs
Wingspan: 60.0 Inches (152.4cm)
Length: 34.0 Inches (86.36cm)
All Up Weight (AUW) 25.0oz. (708gm)
Recommended Parts Needed To Finish Build
Basic Setup (65+MPH) Fast Setup
Motor: 2212/10  1400KV Brushless Motor Motor:
ESC: 30A Brushless ESC with BEC ESC:
Prop: 8×6 PROP Prop:
Battery: 3S 1300mA 45C or Better Battery:
Servos: 5 Mini Metal Gear (9 to 16 gram) Servos:
TX/RX: 6-Channel or Better TX/RX:

Tim’s Old Original Flight Videos:


Archives