Foam, Glue, Tape And A Little Imagination

*** rcFoamFighters FF-SuperNova ***

Model Name: FF-SuperNova

Plan Design By: Paul Petty (Feb. 2010)

Description: Original RC Model Airplane created by Paul Petty. This plane is a scaled up version of the FF-Novajet. The plane built by rcFoamFighters was made out of super durable EPP Foam.  This is currently the fastest plane in Paul’s fleet and his favorite design to date. It features a semi-symmetrical, 30mm thick main wing, with a contoured fuselage and straight vertical stabilizers. Also features basic Aileron & Elevator control surfaces for “Bank and Hank” type flying. With the motor used by rcFoamFighters the plane has reached speeds of over 140 miles per hour. These speeds have been consistently verified on the Radar Gun, GPS and Wave File method.   Recommended for hobbyists with Intermediate to Advanced foam building skills. This plane is not recommended for beginner flyers. The plane is a rock solid Flyer with awesome flight characteristics. 

 

 

PDF Plan Cost:

**FREE!!**

Link to Tiled PDF Plans
Basic Plane Specs
Wingspan: 34.0 Inches (86.36cm)
Length: 35.7 Inches (90.68cm)
All Up Weight (AUW) 48.6oz. (1377.8gm)

 

Recommended Parts Needed To Finish Build
Basic Setup Fast Setup (140+MPH)
Motor: Motor: HobbyKing Turnigy 3648-1450
ESC: ESC: 100Amp Brushless ESC
Prop: Prop: APC 7×8 Sport Prop
Battery: Battery: 5S 2650mA 65C or Better
Servos: Servos: 2 Metal Gear
TX/RX: TX/RX: 4-Channel or better w/Delta mixing

***Note: Turnigy 3648-1450 motor must be modified!!!! (Click Here To See Video)***

Original Old Development, & Flight Videos:





Archives